How To Cut Skirting Board With A Mitre Saw: Tips And Tricks

As an Amazon Associate, I earn from qualifying purchases.

Skirting boards can add a touch of elegance and sophistication to a room while providing an essential line of protection for your walls. However, installing skirting boards can be a challenging task, especially when it comes to cutting them to size. This is where a mitre saw comes in handy. In this article, we will dive deep into the topic of how to cut skirting board with a mitre saw, along with some useful tips and tricks that will help you achieve neat and precise cuts every time.

How To Cut Skirting Board With A Mitre Saw?

What You Will Need

Before we get started, here is a list of the tools and materials you will need to cut skirting board with a mitre saw:

• Mitre saw
• Skirting board
• Pencil
• Tape measure
• Safety goggles
• Dust mask

Step-by-Step Guide

Step 1: Measure and Mark the Skirting Board

The first step in cutting skirting board with a mitre saw is to measure and mark the skirting board where you intend to make your cuts. Use a tape measure to determine the exact length of the skirting board, and then mark the board with a pencil to indicate where you will make your cuts.

Step 2: Adjust the Mitre Saw

Once you have marked the skirting board, the next step is to adjust the mitre saw to the correct angle. This will depend on the type of corners you need to cut. For internal corners, you will need to set the saw to a 45-degree angle to make a mitre cut. For external corners, you will need to set the saw to a 90-degree angle to make a butt cut.

Step 3: Make the Cut

With the mitre saw set to the correct angle, it’s time to make your cut. Place the skirting board onto the mitre saw, making sure it is securely clamped in place. Put on your safety goggles and dust mask, and then pull the saw blade down slowly to make the cut. Make sure to keep your fingers well away from the blade and keep them clear of the path of the saw.

Step 4: Repeat as Necessary

Once you have made your first cut, you can repeat the process for each section of skirting board that needs to be cut. Remember to adjust the angle of the saw as necessary for each internal or external corner.

Tips And Tricks

Here are some additional tips and tricks that will help you achieve the best results when cutting skirting board with a mitre saw:

• Use a sharp saw blade: A dull saw blade can cause splintering and rough edges on your skirting board. Make sure your saw blade is sharp and in good condition.
• Practice safety precautions: Always wear safety goggles and a dust mask to protect your eyes and lungs from sawdust and debris.
• Measure twice, cut once: Take your time when measuring and marking the skirting board. Double-check your measurements to ensure they are accurate before making any cuts.
• Cut on a stable surface: Make sure your mitre saw is set up on a stable surface to prevent it from moving or vibrating during use.
• Make test cuts: If you are new to using a mitre saw, it’s a good idea to make test cuts on scrap pieces of wood before you start cutting your skirting board.

Conclusion

Cutting skirting board with a mitre saw may seem daunting at first, but it’s a skill that can be easily mastered with a bit of practice and the right tools. By following the step-by-step guide and helpful tips and tricks outlined in this post, you will be able to achieve professional-looking cuts that perfectly fit your room’s corners. Remember to always prioritize safety and take your time when making your cuts, and you’ll be a pro in no time!